Dell PowerEdge T610 - Manual (Page 21)

About Your System
21
Power Indicator Codes
An LED indicator on the power button indicates when power is supplied to
the system and the system is operational.
The power supplies have indicators that show whether power is present or
whether a power fault has occurred.
• Not lit — AC power is not connected.
2 system identification
button The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the
LCD panel on the front and the system
status indicator on the back flash blue
until one of the buttons is pushed
again.
3 Ethernet connectors
(2) Integrated 10/100/1000 NIC
connectors.
4 video connector Connects a VGA display to the system.
5 serial connector Connects a serial device to the system.
6 USB connectors (6) Connects USB devices to the system.
The ports are USB 2.0-complaint.
7 iDRAC6 Enterprise
port (optional) Dedicated management port for the
optional iDRAC6 Enterprise card.
8 VFlash media slot
(optional) Connects an external SD memory card
for the optional iDRAC6 Enterprise
card.
9 power supply 2 (PS2) 870-W or 570-W power supply.
10 power supply 1 (PS1) 870-W or 570-W power supply.
11 security cable slot Connects a cable lock to the system.
Item Indicator, Button, or
Connector Icon Description
book.book Page 21 Tuesday, September 15, 2009 10:08 AM