See figure 3-11 – Dell PowerEdge T610 User Manual
Page 97
Advertising
Installing System Components
97
Figure 3-11.
Installing the Internal SD Module
6 Connect the internal SD module cable between the connector on the
module and the J_SDCARD connector on the system board. See
Figure 6-1 for the location of the connector on the system board.
7 Install the cooling shroud. See "Installing the Cooling Shroud."
1
release tab
2
internal SD module cable connector
3
latch
4
SD flash card
5
SD card slot (SD connector)
6
internal SD module
7
hooks (2)
6
7
4
1
2
3
5
book.book Page 97 Tuesday, September 15, 2009 10:08 AM
Advertising