Compaq PROLIANT ML370 - Manual (Page 144)

Index 5
correctable error
threshold exceeded 3-48,
3-49
Diagnostic Error 3-60
dirty data 3-36
disable command issued 3-39
drive (bay)
drive X failed 3-40
drive X inadvertently
replaced 3-40
firmware needs
upgrading 3-39
insufficient capacity 3-39
invalid M&P stamp 3-39
loose cable 3-39
needs replacing 3-40
replacement drive 3-39
replacement drive marked
OK 3-40
undergoing drive
recovery 3-40
upload code not
readable 3-40
Drive (bay) X is non-Compaq
supplied 3-41
drive monitoring
features unobtainable 3-40
not enabled 3-40
drive time-out 3-40
drive X indicates
position Y 3-40
duplicate write memory
error 3-40
Error Detected On Boot
Up 3-60
error occurred reading RIS
copy 3-41
fan
failure 3-48
inserted 3-48
not redundant 3-48
removed 3-48
host bus error 3-49
identify controller data did not
match NVRAM 3-41
identify logical drive data did not
match NVRAM 3-41
insufficient adapter
resources 3-41
logical drive X 3-41, 3-42
loose cable detected 3-42, 3-43
mirror data miscompare 3-43
NMI 3-61
no configuration for Accelerator
board 3-43
NVRAM configuration 3-43
overheat condition 3-48
power AC overload 3-49
power module
failure 3-49
not redundant 3-49
power supply
failure 3-49
inserted 3-49
not redundant 3-49
removed 3-49
Processor Exception 3-61
Processor Prefailure 3-60
Required System Fan
Failure 3-61
resolving 3-26
RIS copies between drives do not
match 3-43
SCSI Port X 3-43, 3-44
Server Manager Failure 3-61
set configuration command
issued 3-44
soft firmware upgrade
required 3-44
system configuration
battery low 3-49
system crash 3-49
system lockup 3-49
unable to communicate with
drive 3-44
uncorrectable error 3-48, 3-49
unknown disable code 3-44
unrecoverable read error 3-44
UPS A/C Line Failure Shutdown
or Battery Low 3-61
warning bit detected 3-45
warning, drive write cache
enabled on X 3-44
write memory error 3-45
wrong Accelerator 3-45
error codes See also test error codes
error codes, description 3-26
ESD See electrostatic discharge
event
AC voltage problem 3-49
automatic OS shutdown 3-49
correctable error
threshold exceeded 3-48,
3-49
threshold passed 3-48
fan
failure 3-48
inserted 3-48
not redundant 3-48
removed 3-48
host bus error 3-49
overheat condition 3-48