Compaq PROLIANT ML370 - Manual (Page 148)

Index 9
right side
part number 1-3
removing 2-11
removing, illustrated 2-11
replacing 2-11
small access
part number 1-3
removing 2-10
removing, illustrated 2-10
replacing 2-10
parallel connector, illustrated 4-3
parallel printer, test error codes 3-29
part numbers
backplane board 1-5
baffle 1-6
battery, 3V lithium 1-5
CD-ROM drive 1-5
chassis 1-3
country kit 1-6
data cable kit 1-5
diskette drive 1-5
fans
CPU 1-5
I/O 1-5
feet 1-3
front bezel 1-3
front bezel plate 1-3
hard drive blank 1-6
hard drives 1-5
illustrated parts map 1-6
integrated management
display 1-6
Integrated Smart Array
Controller 1-7
keyboard 1-6
maintenance and service
guide 1-6
memory 1-5, 1-6
miscellaneous hardware kit 1-6
miscellaneous plastics kit 1-6
panels
large access 1-3
right side 1-3
small access 1-3
power cable kit 1-6
power supply 1-5
power switch w/LEDs 1-5
Processor Power Module 1-5
processor with heat sink 1-5
rack conversion kit 1-6
removable media drive bay
blank 1-6
riser board 1-5
signal cable kit 1-6
slide rail 1-6
system board 1-5
parts
catalog, illustrated 1-1
handling 2-2
storing 2-2
transporting 2-2
password
adminstrator 3-59
disabling 3-65, 4-5
keyboard 3-59
PCI boards, configuring
automatically 3-3
PCI bus slots, illustrated 2-25
plastics kit, part number 1-6
pointing device interface, test error
codes 3-34
POST
beeps, description 3-8
defined 3-7
error messages 3-7, 3-8
power cable kit, part number 1-6
Power On/Standby status LED
indicator, illustrated 2-12
Power On/Standby switch,
illustrated 2-12
power supply
disconnecting, illustrated 2-33
part number 1-5
removing 2-33
removing, illustrated 2-34
replacing 2-34
specifications 5-3
power switch
part number 1-5
removing 2-23
removing, illustrated 2-23
replacing 2-24
unplugging, illustrated 2-24
powering down the server 2-3
Power-On Self-Test See POST
preparation procedures 2-4
processor
part numbers 1-5
removing 2-29
removing, illustrated 2-29
replacing 2-29
test error codes 3-27
processor configuration switch,
identified 4-4
Processor Power Module
part number 1-5
removing 2-30
removing, illustrated 2-30
replacing 2-30