Dell XPS/Dimension XPS Gen 2 User Manual
Page 87
Removing and Installing Parts
87
5
Attach the power and floppy-drive cables to the floppy drive.
6
If you are installing a new floppy drive rather than replacing a drive, remove the front-panel
inserts.
From inside the drive bay, gently press on each side of the insert until it pops out.
7
Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
8
Close the computer cover (see page 102).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
9
Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
floppy-drive cable
power cable
tabs (2)
floppy drive
T2310bk2.book Page 87 Thursday, February 5, 2004 10:00 AM