Dell XPS/Dimension XPS Gen 2 User Manual
Page 90
90
Removing and Installing Parts
www
.dell.com | support.dell.com
6
Gently slide the drive into place until the tabs securely click into position.
7
Connect the power and CD/DVD drive cables to the drive.
If you are adding a drive that has an audio cable, connect the audio cable to the audio
connector on the audio card.
8
If you are installing a new CD/DVD drive rather than replacing a drive, remove the front-
panel inserts.
From inside the drive bay, gently press on each side of the insert until it pops out.
9
If you are installing a drive that has its own controller card, install the controller card in an
expansion slot.
See the documentation that accompanied the drive and controller card to verify that the
configuration is correct for your computer..
power cable
CD/DVD drive cable
tabs (2)
CD/DVD drive
audio cable*
* Some drives do not
have the audio cable.
T2310bk2.book Page 90 Thursday, February 5, 2004 10:00 AM