Dell XPS/Dimension XPS Gen 2 - Manual (Page 92)

92
Removing and Installing Parts
www
.dell.com | support.dell.com
Installing the Processor Airflow Shroud
1 Follow the instructions in "Before You Begin" on page 68.
2 Open the computer cover (see page 70).
3 Insert the bottom anchor tabs into the anchor slots.
4 Align and insert the side anchor tabs into the anchor slots.
5 Press the indentations until the top anchor tabs on the shroud snap securely into place.
6 Close the computer cover (see page 102).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
7 Connect your computer and devices to electrical outlets, and turn them on.
top anchor tabs (2)
bottom anchor tabs (2)
side anchor tabs (2)
airflow shroud
indentations (2)
T2310bk2.book Page 92 Thursday, February 5, 2004 10:00 AM