Dell UPS 1000T - Manual (Page 146)

Troubleshooting 146
For example:
{
'proxyHost': "proxy.domain.com",
'proxyPort': "8080"
}
Then, restart the Dell ULNM to reload the configuration
Dell ULNM Linux displays the Network “Communication Lost” alarm after 20 minutes
Solution:
• Improvement in the next release.
When Activating Shutdown Controller under Linux
When you enable the Shutdown Controller optional module, a problem in the Dell ULNM service
initialization occurs.
Solution:
• The issue can be easily solved by restarting the Dell ULNM daemon once the “Shutdown Controller”
module has been activated. There is no need to restart the Dell ULNM daemon when disabling this
feature.
Events and Actions with Some Windows x64 bits OS
When the shutdown command is called from the Dell ULNM context, the system doesn't find it
because it searched in C:\Windows\SysWOW64 even if the specified path is explicitly
C:\Windows\System32\shutdown.exe.
NOTE: This is a problem of some Windows x64 OS versions (e.g. XP x64 and 2003 x64). For example, this problem
doesn't appear on Windows 7 x64.
Solution:
• Retrieve “shutdown.exe” from the C:\Windows\System32\ folder and copy it into D:\ULNM\ for
example. Then modify “shutdown.bat” to explicitly call D:\ULNM\shutdown.exe
Windows Vista Hibernate Sequence
By default, the Dell ULNM runs an Operating System “Hibernate.” Unfortunately, the “Hibernate”
option of Windows Vista is sometimes no longer available after performing a disk cleanup. In this
case, Windows Vista “Hibernate” fails.
0120_3-Dell ULNM UG.book Page 146 Saturday, November 2, 2013 5:34 PM