Statistics panel – Dell UPS 1000T User Manual
Page 74
Supervision
74
Statistics Panel
This panel displays the statistics of the selected node (see Figure 58). The
button allows you to select
the time interval for the statistics. You can adjust the time interval by clicking the two buttons with the
“From” and “To” dates.
The statistics computed data is as follows:
• Apparent Consumption (or Active Consumption in next release, in Watts)
• Average Apparent Power (or Average Active Power in next release, in Watts)
• Power Failure Count
• Power Failure Cumulated Duration
• Battery Fault Count
• Internal Failure Count
• Overload Count
• Warning Alarm Count
• Critical Alarm CounOutput Off Count
• Communication Lost Count
NOTE:
This information depends on device capabilities.
Figure 58. Statistics Panel
0120_3-Dell ULNM UG.book Page 74 Saturday, November 2, 2013 5:34 PM