Dell UPS 1000T - Manual (Page 58)

Configuration 58
Configure Node Settings
An administrator can configure node information and access parameters using the Settings > Auto
Discovery menu item selection. The Nodes List page displays. Click the Edit node information button or
click the Set node access parameters button in the right panel.
• Edit node information dialog. The Edit node information dialog box allows editing the node name,
the user type, the node description and the associated load alarm threshold (see Figure 40).
• Access parameters dialog. You can define the way users will be notified when node events happen and
edit authentication settings for all selected devices. Only relevant settings are set, depending on the
capabilities of the selected device (see Figure 41).
Figure 40. Edit Node Information Dialog
Figure 41. Access Parameters Dialog
0120_3-Dell ULNM UG.book Page 58 Saturday, November 2, 2013 5:34 PM