Silent installation – Dell UPS 1000T User Manual
Page 25
Installation
25
Figure 9. Login Screen
NOTE:
If the browser does not open as planned, it should be started manually and pointed to http://127.0.0.1:4679/.
Silent Installation
The silent installation is performed in command line mode (without user interaction).
To install the Dell ULNM:
1 At the command line prompt, type the following:
<Dell ULNM package name> -install -silent
2 When the installation is completed, open a Web browser with the following URL:
http://<@IP>:4679/ (where <@IP> is the IP address of the machine hosting the Dell ULNM)
Refer to the following configuration notes:
• To configure the IP address of the Power Source, you can use the Dell Multi-UPS Management
Console® (Dell MUMC) mass configuration feature.
• You can also use the command line to configure the power source:
<DELL ULNM package name> -install -silent -sdn
<login>:<password>@<address>,<loadSegment>,<shutdownDuration>,
<shutdownTimer>,<shutoffControl>
• The -help option describes the different options available (see Figure 10).
0120_3-Dell ULNM UG.book Page 25 Saturday, November 2, 2013 5:34 PM