Dell UPS 1000T User Manual
Page 78
Supervision
78
WARNING A problem occurred on the UPS device. Your application is still protected.
UPS warning event list:
• The system is powered by the UPS battery
• Output on automatic bypass
• Output on manual bypass
• Humidity is below low threshold
• Humidity is above high threshold
• Temperature is below low threshold
• Temperature is above high threshold
• Warning Alarm (a generic Warning alarm is active on the device)
• The device is under its load alarm threshold
• The device is over its load alarm threshold
• Protection lost
• Redundancy lost
• Shutdown in <time>
• Remote Communication Error (remote communication or configuration issue is detected)
CRITICAL A serious problem occurred on the UPS device. This problem requires an urgent action.
Your application might NOT BE powered.
• UPS critical event list:
• The UPS output is off
• The outlet group 1 is off
• The outlet group 2 is off
• Battery fault
• UPS overload
• UPS fault
• Low battery alarm
• Applications must stop immediately...
• System shutdown in progress...
• Critical alarm (a generic Critical alarm is active on the device)
COMMUNICATION LOST Communication is lost.
UPS communication event list:
• Communication failure with Device or Application
0120_3-Dell ULNM UG.book Page 78 Saturday, November 2, 2013 5:34 PM