Dell PowerVault 211S (SCSI) - Manual (Page 82)

7-24 Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems Installation and Service Guide
21. Reinstall the dual-bus split backplane module (see "Removing the Dual-Bus Split
Backplane Module," found earlier in this chapter).
22. Reinstall the component mounting bracket (see "Removing and Reinstalling the
Component Mounting Bracket," found earlier in this chapter).
23. Reinstall the module(s) (see "Replacing an Enclosure Module," found earlier in
this chapter).
24. Reinstall all of the cooling fans (see "Replacing a Cooling Fan," found earlier in this
chapter).
25. Reinstall all of the power supplies (see "Replacing the Power Supply," found
earlier in this chapter).
5HPRYLQJ DQG 5HLQVWDOOLQJ WKH /RFN %DU
To remove the lock bar for the PowerVault 2xxS storage systems, perform the follow-
ing steps:
1. Grasp the tab on the far right end of the bar.
2. Use the key to unlock the keylock.
3. Pull the lock bar out to release it from the system (see Figure 7-14).