Dell PowerEdge R510 - Manual (Page 125)

Installing System Components
125
6 Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the expansion-card
riser.
7 Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8 Close the expansion-card latch. See Figure 3-20.
Figure 3-20. Installing or Removing an Expansion Card
9 Connect any cables to the expansion card.
1 expansion-card riser 2 expansion-card latch
3 expansion card
3
2
1
book.book Page 125 Friday, November 20, 2009 2:56 PM