Dell PowerEdge R510 - Manual (Page 36)

36
About Your System
E1A14 SAS cable A
failure.
Check
connection.
SAS cable A is missing
or bad. Reseat the cable. If the
problem persists,
replace cable.
If the problem persists,
see "Getting Help" on
page 199.
E1A15 SAS cable B
failure.
Check
connection.
SAS cable B is missing
or bad. Reseat the cable. If the
problem persists,
replace cable.
If the problem persists,
see "Getting Help" on
page 199.
E1A1D Control panel
USB cable not
detected.
Check cable.
USB cable to the control
panel is missing or bad. Reseat the cable.
If the problem persists,
replace cable.
If the problem persists,
see "Getting Help" on
page 199.
E2010 Memory not
detected.
Inspect DIMMs.
No memory was detected
in the system. Install memory or reseat
memory modules.
See "Installing Memory
Modules" on page 119 or
"Troubleshooting System
Memory" on page 177.
E2011 Memory
configuration
failure.
Check DIMMs.
Memory detected,
but is not configurable.
Error detected during
memory configuration. See "Troubleshooting
System Memory" on
page 177.
E2012 Memory
configured but
unusable.
Check DIMMs.
Memory configured,
but is unusable. See "Troubleshooting
System Memory" on
page 177.
E2013 BIOS unable to
shadow memory.
Check DIMMs.
The system BIOS failed
to copy its flash image
into memory. See "Troubleshooting
System Memory" on
page 177.
Code Text Causes Corrective Actions
book.book Page 36 Friday, November 20, 2009 2:56 PM