Installing an expansion-card riser, Figure 3-21 – Dell PowerEdge R510 User Manual
Page 128
Advertising
128
Installing System Components
Figure 3-21.
Installing or Removing an Expansion-Card Riser
Installing an Expansion-Card Riser
1 To install an expansion-card riser, align the riser guides with the riser guide
posts on the system board. See Figure 3-21.
2 Lower the expansion-card riser into place until the expansion-card riser
connector is fully seated.
3 If applicable, reinstall the expansion card. See "Installing an Expansion
1
integrated storage controller slot
2
riser guides (2)
3
expansion-card riser
4
expansion card slot
5
riser guide posts (2)
6
expansion-card riser slots (2)
6
1
2
3
5
4
book.book Page 128 Friday, November 20, 2009 2:56 PM
Advertising