Removing a hard drive from a hard-drive carrier – Dell PowerEdge R510 User Manual
Page 94
Advertising
94
Installing System Components
4 With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See Figure 3-8.
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-9.
Figure 3-9.
Installing a Hot-Swap Hard Drive Into a Drive Carrier
1
hard drive
2
SAS/SATA indicator
3
drive carrier
4
screws (4)
2
1
3
4
book.book Page 94 Friday, November 20, 2009 2:56 PM
Advertising