Dell PowerEdge R510 - Manual (Page 99)

Installing System Components
99
Internal Hard Drives
All twelve-hard-drive systems support two cabled 2.5-inch (SAS or SATA)
internal hard drives. Internal hard drives are connected to the SAS backplane.
It is recommended that you install the operating system on the internal hard
drives in a RAID 1 configuration. For information on RAID configuration, see
the RAID documentation on support.dell.com/manuals.
Removing an Internal Hard Drive Bay
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that
came with the product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and from the peripherals.
2 Open the system. See "Opening the System" on page 87.
3 Lift the latch on your internal hard drive bay and lift it out of the system.
See Figure 3-12.
book.book Page 99 Friday, November 20, 2009 2:56 PM