Dell POWEREDGE 1955 - Manual (Page 103)

Troubleshooting Your System
103
5 If two or more server modules are installed in the chassis, press the KVM selection button on a
different server module.
NOTE:
After pressing the KVM selection button, allow approximately two seconds for the KVM functions to
change to a different server module.
If the monitor is connected to the back-panel KVM module and works with another server module, the
first server module may need to be reseated. See "Server Modules" on page 73. If reseating the server
module does not help, the server module may be faulty. See "Getting Help" on page 127.
6 Swap the monitor with a known-working monitor and repeat step 4 and step 5.
If the monitor does not work when connected to either the front-panel custom cable or to the back-
panel custom cable, the server module may be faulty. See "Getting Help" on page 127.
If the monitor works in the back-panel custom cable and not the front-panel custom cable, the front-
panel custom cable may be faulty. See "Getting Help" on page 127.
If the monitor works in the front-panel custom cable and not the back-panel custom cable, the KVM
module or the back-panel custom cable may be faulty. See "Getting Help" on page 127.
Troubleshooting the Keyboard
NOTE:
USB keyboard devices can be connected only to the front-panel custom cable, and PS/2 keyboard devices
can be connected only to the back-panel custom cable.
Problem
• A symptom of a keyboard problem is indicated by a system message
• Keyboard or keyboard cable
• Keyboard/Video/Mouse (KVM) custom cable
• KVM module
• Server module
Action
1 Ensure that the server module(s) is turned on.
2 Check the keyboard connection to the custom cable.
3 Check the custom cable connection to either the front-panel custom cable connector on the server
module or to the back-panel KVM module.
4 If you are connecting a keyboard to the front-panel custom cable connector, test the keyboard and
front-panel custom cable on a different server module, if available.
5 If the keyboard does not function from the back-panel KVM module, ensure that the KVM selection
indicator on the front panel of the server module is green. If not, press the KVM selection button. See
Figure 1-3.