Installing a power supply module, Fan modules – Dell POWEREDGE 1955 User Manual
Page 59
Advertising
Installing System Options
59
Figure 3-1.
Removing and Installing a Power Supply Module
Installing a Power Supply Module
1 Ensure that the power-supply module handle is fully down and then slide the power
supply module into the chassis until it is fully seated. See Figure 3-1.
2 Rotate the power-supply module handle upward until its release tab snaps securely into
place.
3 Plug a power cable into the power supply module.
Fan Modules
Your system contains up to four system fans (two sets of redundant fans) contained in two
hot-pluggable fan modules. Each fan module has system fan indicators on its back panel
that identify the status of each of its system fans. See Figure 1-7.
2
1
3
1
handle
2
release tab
3
power supply module
Advertising