Display-panel brackets, Removing the display-panel brackets – Dell Inspiron One 2320 (Mid 2011) User Manual

Page 114

Advertising
background image

114

Display

2 Align the screw holes on the display panel with the screw holes on the

display-panel chassis and replace the four screws.

3 Replace the display assembly. "Replacing the Display Assembly" on

page 111.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

4 Connect your computer and all attached devices to electrical outlets, and

turn them on.

Display-Panel Brackets

Removing the Display-Panel Brackets

1 Follow the instructions in "Before You Begin" on page 11.
2 Remove the display assembly. See "Removing the Display Assembly" on

page 109.

3 Remove the display panel. See "Removing the Display Panel" on page 113.
4 Turn the display panel over.
5 Press the locking tabs on the LVDS cable to release the LVDS cable from

the connector on the display panel.

6 Remove the four screws (two on each side) that secure the display-panel

brackets to the display panel.

book.book Page 114 Thursday, May 3, 2012 1:21 PM

Advertising