Dell Inspiron One 2320 (Mid 2011) - Manual (Page 38)

38 VESA Mount
5 Lift the VESA mount away from the chassis.
Replacing the VESA Mount
1 Follow the instructions in "Before You Begin" on page 11.
2 Align the screw holes on the VESA mount with the screw holes on the
chassis and place the VESA mount on the chassis.
3 Replace the six screws that secure the VESA mount to the chassis.
4 Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
5 Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
6 Connect your computer and all attached devices to electrical outlets, and
turn them on.
1 screws (6) 2 VESA mount
1
2
book.book Page 38 Thursday, May 3, 2012 1:21 PM