Entering the service tag in the bios – Dell Inspiron One 2320 (Mid 2011) User Manual

Page 67

Advertising
background image

System Board

67

7 Replace the Mini-Card(s). See "Replacing the Mini-Card(s)" on page 63.
8 Replace the memory module(s). See "Replacing Memory Module(s)" on

page 33.

9 Replace the system-board shield. See "Replacing the System-Board Shield"

on page 54.

10 Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
11 Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.
12 Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"

on page 36.

13 Replace the back cover. See "Replacing the Back Cover" on page 21.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

14 Turn on the computer.

NOTE:

After you have replaced the system board, enter the computer’s Service Tag

in the BIOS of the replacement system board.

15 Enter the Service Tag. See "Entering the Service Tag in the BIOS" on

page 67.

Entering the Service Tag in the BIOS

1 Turn on the computer.
2 Press <F2> during POST to enter the system setup program.
3 Navigate to the main tab and enter the service tag in the Service Tag

Setting field.

book.book Page 67 Thursday, May 3, 2012 1:21 PM

Advertising