Replacing the processor heat-sink, Sink. see "replacing the processor heat-sink – Dell Inspiron One 2320 (Mid 2011) User Manual
Page 80
80
Processor Heat Sink
8 Loosen the four captive screws that secure the processor heat-sink to the
system board.
9 Carefully lift the processor heat-sink away from the computer.
NOTE:
The appearance of the processor heat-sink may vary based on your
computer model.
Replacing the Processor Heat-Sink
CAUTION:
Incorrect alignment of the processor heat-sink can cause damage to
the system board and processor.
NOTE:
The original thermal grease can be reused if the original processor and
processor heat-sink are reinstalled together. If either the processor or the
processor heat-sink is replaced, use the thermal grease provided in the kit to
ensure that thermal conductivity is achieved.
1 Follow the instructions in "Before You Begin" on page 11.
1
screw
2
processor heat-sink
3
captive screws (4)
3
2
1
book.book Page 80 Thursday, May 3, 2012 1:21 PM