Dell Inspiron One 2320 (Mid 2011) - Manual (Page 76)

76 Heat-Sink Fans
10 Carefully peel the silver foil from the processor heat-sink.
11 Lift the processor heat-sink fan along with its cable away from the chassis.
NOTE: The appearance of the system board may vary based on your computer
model.
Replacing the Processor Heat-Sink Fan
1 Follow the instructions in "Before You Begin" on page 11.
2 Align the screw holes on the processor heat-sink fan with the screw holes
on the chassis.
3 Adhere the silver foil on the processor heat-sink.
4 Replace the three screws that secure the processor heat-sink fan to the
chassis.
5 Connect the processor heat-sink fan cable to the connector (CPU FAN) on
the system board.
1 processor heat-sink fan 2 screws (3)
3 processor heat-sink fan cable
3 2
1
book.book Page 76 Thursday, May 3, 2012 1:21 PM