Replacing the rear-stand assembly – Dell Inspiron One 2320 (Mid 2011) User Manual
Page 36
Advertising
36
Rear Stand Cover
Replacing the Rear-Stand Assembly
1 Follow the instructions in "Before You Begin" on page 11.
2 Place the rear-stand assembly on the chassis and slide it to the top of the
computer.
3 Replace the two screws that secure the rear-stand assembly to the chassis.
4 Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
5 Connect your computer and all attached devices to electrical outlets, and
turn them on.
1
rear-stand assembly
2
screws (2)
1
2
book.book Page 36 Thursday, May 3, 2012 1:21 PM
Advertising