Dell Inspiron One 2320 (Mid 2011) - Manual (Page 131)

System Setup Utility 131
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
• Diskette Drive — The computer attempts to boot from the floppy disk
drive. If no operating system is on the drive, the computer generates an
error message.
• Hard Drive — The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
• CD/DVD/CD-RW Drive — The computer attempts to boot from the
CD/DVD/CD-RW drive. If no CD/DVD/CD-RW is in the drive, or if the
CD/DVD/CD-RW has no operating system, the computer generates an
error message.
• USB Storage Device — Insert the memory device into a USB connector
and restart the computer. When F12 Boot Options appears in the
lower-right corner of the screen, press <F12>. The BIOS detects the
device and adds the USB flash option to the boot menu.
NOTE: To boot to a USB device, the device must be bootable. To ensure that your
device is bootable, check the device documentation.
• Network — The computer attempts to boot from the network. If no
operating system is found on the network, the computer generates an error
message.
Changing Boot Sequence for the Current Boot
You can use this feature to change the current boot sequence, for example, to
boot from the CD/DVD/CD-RW drive to run Dell Diagnostics from the
Drivers and Utilities disc. On completion of diagnostic tests, the previous
boot sequence is restored.
1 If you are booting from a USB device, connect the USB device to a USB
connector.
2 Turn on (or restart) your computer.
3 When F2 Setup, F12 Boot Options appears in the lower-right
corner of the screen, press <F12>.
book.book Page 131 Thursday, May 3, 2012 1:21 PM