Replacing the converter board – Dell Inspiron One 2320 (Mid 2011) User Manual
Page 48
Advertising
48
Main Chassis
.
Replacing the Converter Board
1 Follow the instructions in "Before You Begin" on page 11.
2 Align the screw holes on the converter board with the screw holes on the
chassis.
3 Replace the two screws that secure the converter board to the chassis.
4 Connect the converter-board cable to the connector on the converter
board.
5 Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
6 Replace the VESA mount. See "Replacing the VESA Mount" on page 38.
7 Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
8 Replace the back cover. See "Replacing the Back Cover" on page 21.
1
screws (2)
2
converter-board cable
3
converter-board connector
2
1
3
book.book Page 48 Thursday, May 3, 2012 1:21 PM
Advertising