Changing your audio settings, Enabling the display settings for a tv – Dell Inspiron XPS Gen 2 User Manual
Page 45
Using CDs, DVDs, and Other Multimedia
45
7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on
the computer.
8 See "Enabling the Display Settings for a TV" on page 45 to ensure that the computer
recognizes and works properly with the TV.
Changing Your Audio Settings
You can set the speaker configuration for PC speakers, headphones, or S/PDIF (digital output).
1 Double-click CyberLink PowerDVD in the All Programs menu.
2 Click Settings.
3 Click DVD.
4 Click Audio Settings.
5 Under Speaker Configurations, select your desired output.
6 Click Back twice to return to the main menu.
If you selected SPDIF in step 5, also verify the following settings:
a
Exit PowerDVD.
b
Double-click the speaker icon in the Windows notification area.
c
Click the Options menu and then click Advanced Controls.
d
Click Advanced.
e
Click Enable S/PDIF.
f
Click Close.
g
Click OK.
h
Reopen PowerDVD.
7 Insert a DVD into the DVD drive.
The DVD will autorun.
Enabling the Display Settings for a TV
NOTE:
Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel.
2 Click Appearances and Themes.
3 Under or pick a Control Panel icon, click Display.
4 Click the Settings tab and click Advanced.
5 Click the Nvidia GeForce tab.
6 On the left side of the menu, click nView Display Mode.
7 Click Clone to enable the television.
G8011bk2.book Page 45 Thursday, March 31, 2005 1:50 PM