Dell Inspiron XPS Gen 2 - Manual (Page 51)

Using PC Cards
51
Using PC Cards
PC Card Types
See "Specifications" on page 103 for information on supported PCMCIA cards and PC Card
slots.
The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card
slot supports CardBus technology and extended PC Cards. "Type" of card refers to its thickness,
not its functionality.
PC Card Blanks
Your computer shipped with a plastic blank installed in the PC Card slot. Blanks protect unused
slots from dust and other particles. Save the blank for use when no PC Card is installed in the
slot; blanks from other computers may not fit your computer.
To remove the blank, see "Removing a PC Card or Blank" on page 52.
Extended PC Cards
An extended PC Card (for example, a wireless network adapter) is longer than a standard PC
Card and extends outside the computer. Follow these precautions when using extended PC
Cards:
• Protect the exposed end of an installed card. Striking the end of the card can damage the
system board.
• Always remove an extended PC Card before you pack the computer in its carrying case.
Installing a PC Card
You can install a PC Card in the computer while the computer is running. The computer
automatically detects the card.
PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which
end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation
is not clear, see the documentation that came with the card.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
G8011bk2.book Page 51 Thursday, March 31, 2005 1:50 PM