Dell Inspiron XPS Gen 2 - Manual (Page 94)

94
Adding and Replacing Parts
www
.dell.com | support.dell.com
6 Replace the modem cover.
Hinge Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1 Follow the procedures in "Before You Begin" on page 83.
2 Remove the hinge cover.:
a Open the display all the way (180 degrees) so that it lies flat against your work surface.
NOTICE:
To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
b Insert a scribe into the indent to lift the hinge cover on the right side.
c Ease the hinge cover up, moving from right to left, and remove it.
G8011bk2.book Page 94 Thursday, March 31, 2005 1:50 PM