Dell Inspiron XPS Gen 2 - Manual (Page 91)

Adding and Replacing Parts
91
4 Remove the existing modem:
a Remove the screw securing the modem to the system board, and set it aside.
b Pull straight up on the attached pull-tab to lift the modem out of its connector on the
system board, and disconnect the modem cable.
5 Install the replacement modem:
a Connect the modem cable to the modem.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
b Align the modem with the screw holes and press the modem into the connector on the
system board.
c Replace the screw that secures the modem to the system board.
6 Replace the modem cover.
Mini PCI Card
If you ordered a Mini PCI card with your computer, the card is already installed.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
modem
system board
connector
pull-tab
screw
modem cable
G8011bk2.book Page 91 Thursday, March 31, 2005 1:50 PM