Dell Inspiron XPS Gen 2 - Manual (Page 52)

52
Using PC Cards
www
.dell.com | support.dell.com
To install a PC Card:
1 Hold the card with the top side of the card facing up. The latch may need to be in the "in"
position before you insert the card.
2 Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
The computer recognizes most PC Cards and automatically loads the appropriate device driver.
If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or
CD that came with the PC Card.
Removing a PC Card or Blank
NOTICE:
Use the PC Card configuration utility (click the icon in the taskbar) to select a card and
stop it from functioning before you remove it from the computer. If you do not stop the card in the
configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is
attached.
G8011bk2.book Page 52 Thursday, March 31, 2005 1:50 PM