Dell POWEREDGE M1000E User Manual

Page 18

Advertising

Fabric OS v6.4.1 Release Notes v1.0

Page 18 of 62

DCX/DCX

DCX/DCX----4S Blade Support Matrix

4S Blade Support Matrix

Encryption Blade (FS8-18)

Up to a maximum of 4 blades of this type.

Extension Blade (FX8-24)

Up to a maximum of 4 blades of this type.

FCoE/CEE Blade (FCOE10-24)

Up to a maximum of 2 blades of this type. Cannot be
used in a chassis with other intelligent blades (can only
be installed concurrently with FC8-XX and/or FC10-6
blades).

Cannot be used in a DCX/DCX-4S chassis with FC8-64
blade in FOS v6.4.

Note: the iSCSI FC4-16IP blade is not qualified for the DCX/DCX-4S.

Power Supply Requirements for B

Power Supply Requirements for Blades in 48k and DCX/DCX

lades in 48k and DCX/DCX

lades in 48k and DCX/DCX----4S Chassis

4S Chassis

Blades

Type of

Blade

48K

@200-240

VAC

(Redundant

configurations)

DCX/DCX

DCX/DCX----4S

@110 VAC

(Redundant

configurations)

DCX/DCX

DCX/DCX----4S

@200-240 VAC

(Redundant

configurations)

Comments

FC4-16, FC 4-
32, FC4-48,
FC8-16, FC8-
32

Port Blade

2 Power
Supplies

2 Power Supplies

•

Distribute the Power
Supplies evenly to 2
different AC
connections for
redundancy.

FC10-6, FC8-
16, FC8-32,
FC 8-48,
FC8

FC8

FC8----64

Port Blade

4 Power
Supplies

Not Supported 2 Power Supplies

FR4-18i,
FC4-16IP

FA4-18

Intelligent
Blade

4 Power
Supplies

Not Supported 2 Power Supplies

FS8-18,
FX8-24,
FCOE10-24

Intelligent
Blade

N/A

Not Supported DCX: 2 or 4 Power

Supplies

DCX-4S: 2 Power
Supplies

•

For DCX with three or
more FS8-18 Blades,
(2+2) 220VAC Power
Supplies are required
for redundancy.

•

For DCX with one or
two FS8-18 Blades,
(2) 220VAC Power
Supplies are required
for redundancy.

•

For DCX-4S, (2)
220VAC Power
Supplies provide

FC8-64 is not supported on 48K

FC4-16IP is not supported on DCX/DCX-4S

Advertising