Dell POWEREDGE M1000E - Manual (Page 43)

Close with Code Change in Fabric OS v6.4.1
Fabric OS v6.4.1 Release Notes v1.0 Page 43 of 62
Defect ID: DEFECT000298571 Technical Severity: Medium
Summary: "(DLS)" label needs to be removed from the "Dynamic Load Sharing" and "Lossless" group
boxes that show up in the Webtools Switch Administration Routing Tab
Symptom: Confusion due to ambiguous text in Webtools for "Dynamic Load Sharing" and "Lossless" in
the Routing Tab group box under Switch Administration.
Feature: WebMgmt Function: Switch Admin
Probability: Low
Found in Release: FOS6.4.0
Defect ID: DEFECT000298920 Technical Severity: Medium
Summary: QoS priority traffic distribution over an FCIP tunnel may be incorrect with large amounts of
outstanding I/O, due to resource depletion at high IO rates.
Symptom: QoS circuits running over a 1G/10G bandwidth circuit will have incorrect QoS distributions
with large I/O, resulting in QoS priority traffic distribution not being enforced properly over
an FCIP Tunnel. Customer using QoS zoning may see performance issues
Feature: FCIP Function: FCIP I/O
Probability: Medium
Found in Release: FOS6.3.1
Where Else Fixed: FOS6.3.2
Defect ID: DEFECT000298963 Technical Severity: Medium
Summary: Weblinker keeps unused file descriptors caused FFDCs and RAS-1004 Software 'Verify'
errors every 3 minutes on a VF, filling up the RASLOG.
Symptom: On a switch being managed by DCFM or Webtools, with VF enabled and Radius server
configured, customer may see RAS-1004 Software 'Verify' errors every 3 minutes on each
VF, filling up the RASLOG and causing en eventual FFDC event in other system modules du
Feature: Field Escalation Function: OS: Infrastructure
Probability: Medium
Found in Release: FOS6.3.1 Service Request ID: 430447
Defect ID: DEFECT000299528 Technical Severity: Medium
Summary: When running tape operations using tape pipelining in a Brocade 7800 or FX8-24 blade,
the FCP_CONF command may be dropped, causing the tape operation to fail.
Symptom: I Series I/O stops with tape pipelining enabled, causing tape operations running over a
Brocade 7800 or FX8-24 blade to not complete successfully.
Feature: FCIP Function: Emulation
Probability: Low
Found in Release: FOS6.3.1
Where Else Fixed: FOS6.3.2