Dell POWEREDGE M1000E User Manual

Page 38

Advertising
background image

Close with Code Change in Fabric OS v6.4.1

Fabric OS v6.4.1 Release Notes v1.0

Page 38 of 62

Defect ID: DEFECT000296266

Technical Severity: High

Summary: When Auto Port Configuration is enabled on an Access Gateway, switch will lock the port as

an N_Port if no FLOGI received within timeout period, then disable it after receiving ELS
rejects

Symptom: On a Brocade 5480 with the Auto Port Configuration (APC) feature enabled, ports will

become locked down as N_Ports if there is no FLOGI sent by an attached device within the
timeout period. This can happen if using Boot over SAN during the period when the

Workaround: Use default AG -PG policy

Feature: Access Gateway Services

Function: Embedded Platforms

Probability: Medium

Found in Release: FOS6.3.0

Service Request ID: 420895

Defect ID: DEFECT000300183

Technical Severity: High

Summary: RPCD panic and subsequent switch cold recovery occurs due to internal memory

synchronization and corruption issues when changing security settings

Symptom: Cold recovery of the CP can happen when a user changes their security configuration

(certificates or rpc secret) through webtools while there is an active RPC connection from
SMI-A.

Workaround: Customers that experience this problem can stop using their SMI based application until

the code upgrade complete.

Feature: Field Escalation

Function: Panic / OOM

Probability: Medium

Found in Release: FOS6.3.0

Service Request ID: 432349

Where Else Fixed: FOS6.3.2

Defect ID: DEFECT000300195

Technical Severity: High

Summary: When two asynchronous entities (SMI-A and DCFM) are managing the switch at the same

time it exposes a race condition, causing switch panic

Symptom: Switch panics when being managed by both DCFM and SMI-A management applications.

Feature: Field Escalation

Function: Management Services

Probability: Low

Found in Release: FOS6.3.0

Service Request ID: 428387

Defect ID: DEFECT000300326

Technical Severity: High

Summary: Weblinker causes active CP to reboot (initiate a cold recovery) when the standby CP is not

responsive (stuck in a reboot loop).

Symptom: Weblinker on active CP panics, leading to a cold recovery.

Feature: Field Escalation

Function: Management Services

Probability: Low

Found in Release: FOS6.2.0

Service Request ID: 432083

Advertising