Dell POWEREDGE M1000E User Manual

Page 44

Advertising
background image

Close with Code Change in Fabric OS v6.4.1

Fabric OS v6.4.1 Release Notes v1.0

Page 44 of 62

Defect ID: DEFECT000300954

Technical Severity: Medium

Summary: ceeturboramtest not running as part of systemverification in FCOE10-24 and Brocade

8000.

Symptom: RAM errors are not detected by systemverification diagnostic.

Feature: Diagnostics

Function: Post Diags

Probability: Low

Found in Release: FOS6.4.0

Defect ID: DEFECT000301650

Technical Severity: Medium

Summary: Spinfab fails on an Eport residing in a Base switch.

Symptom: Frame drops and undefined behavior can be expected while running spinfab.

Feature: Diagnostics

Function: Other

Probability: High

Found in Release: FOS6.4.0

Defect ID: DEFECT000301959

Technical Severity: Medium

Summary: In a Brocade 48000 with an FC4- 48 blade, after port enable/disable of primary port, NPIV

PIDs disappear from cam table entries, disrupting data.

Symptom: In a Brocade 48000 with an FC4- 48 blade, booting a host connected to a primary port

causes NPIV data on secondary port IO to abort.

Feature: Field Escalation

Function: ASIC Driver

Probability: High

Found in Release: FOS6.3.0

Service Request ID: 422909

Defect ID: DEFECT000302032

Technical Severity: Medium

Summary: Port is reinitialized multiple times during unstable signal/port fault period when connected

to certain servers that do not cut light when rebooting.

Symptom: With certain very specific servers that do not cut off light during reboot, the switch cannot

bring an F_Port on line for a long time.

Feature: Field Escalation

Function: ASIC Driver

Probability: Low

Found in Release: FOS6.3.1

Defect ID: DEFECT000302170

Technical Severity: Medium

Summary: Long TPERF runs result in inaccurate stats as well as FCIP tunnel bounces. The 7800

needs to be rebooted to recover.

Symptom: TPERF reflected incorrect loss and out of order statistics. The FCIP Tunnel will eventually go

down during TPERF runs, even on a clean network. The 7800/FX8-24 needs to be rebooted
to recover.

Feature: FCIP

Function: FCIP CLI

Probability: Medium

Found in Release: FOS6.4.0

Advertising