Dell 1600n Multifunction Mono Laser Printer - Manual (Page 100)

NOTE: You can adjust the speaker volume only when the telephone line is connected.
Press <On Hook Dial>. A dial tone sounds from the speaker. 1.
Press the scroll button ( or ) until you hear the loudness you want. The display shows the current
volume level. 2.
Press <On Hook Dial> to save the change and return to Standby mode. 3.
Toll Save Mode
The Toll Save mode can be used to save scanned documents for transmission at a specified time in order to
take advantage of lower long distance rates.
To turn the Toll Save mode on:
Press <Menu> until "Advanced Fax" appears on the top line of the display. 1.
Press the scroll button ( or ) until you see "Toll Save"on the bottom line and press <Select>. 2.
Press the scroll button ( or ) until "On" displays on the bottom line and press <Select>. 3.
Press <Select> when "Start Time" displays on the bottom line. 4.
Enter the time and date when your multi-function printer starts sending toll save faxes, using the
number keypad. 5.
To select "AM" or "PM" for 12-hour format, press the or the button.
Press <Select> when the starting time on the display is correct. 6.
Press the scroll button ( or ) to display "End Time" and press <Select>. 7.
Enter the time and date when the toll save transmission ends, using the number keypad. 8.
Press <Select> to save the setting. 9.
To return to Standby mode, press <Return>. 10.
Once Toll Save mode is activated, your multi-function printer stores all of the documents to be faxed into its
memory and sends them at the programmed time.
To turn Toll Save mode off, follow steps 1 and 2 above and then press the scroll button ( or ) until "Off"
displays at the bottom line and press <Select>.