Dell 1600n Multifunction Mono Laser Printer - Manual (Page 160)

NOTE: To receive a printed or screen displayed message when PS errors occur, open the
Print Options window and click the desired selection next to the PostScript errors section.
Problem Possible Cause Solution
PostScript file can not
be printed. The PostScript option may
not be installed. Print a configuration page and verify that the PS
version is available for printing.
"This job contains
binary data...
"
message appears.
The pure binary data
option is not supported by
the PostScript driver. Open the Properties of the PostScript driver, click
on PostScript, and click on Advanced. The pure
binary data option is not supported. Choose
another.
A PS error page
prints. Print job may not be PS. Make sure that the print job is a PS job. Check to
see whether the software application expected a
setup or PS header file to be sent to the multi-
function printer.
The optional Tray 2 is
not selected in the
driver. The printer driver has not
been configured to
recognize the optional
Tray 2. Open the PostScript driver properties and set the
Option Tray item of the Device option to
Installed.