Dell 1600n Multifunction Mono Laser Printer User Manual
Page 23
To connect the multi-function printer to a computer:
Make sure the multi-function printer, computer, and any other attached devices are powered off and
unplugged.
1.
Connect a USB cable to the USB connector on your multi-function printer.
2.
Connect the other end of the cable into an available USB port on the computer, not the USB keyboard.
3.
Connecting the Multi-Function Printer to the Network
Make sure the multi-function printer, computer, and any other attached devices are powered off and
unplugged.
1.
Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable into a LAN drop
or hub, and the other end into the Ethernet network port on the back of the multi-function printer. The
multi-function printer automatically adjusts for the network speed.
2.
NOTE:
After connecting the multi-function printer, you need to configure the network
parameters on the operator panel. See page 147 .