Dell 1600n Multifunction Mono Laser Printer - Manual (Page 129)

To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the
following steps:
Press <Menu> until you see "Network Setup" on the bottom line of the display. 1.
Press the scroll button ( or ) until "Configuration" displays on the bottom line. Press <Select>. 2.
Press the scroll button ( or ) to display "TCP/IP" and press <Select>. 3.
Press the scroll button ( or ) to display "DHCP" on the bottom line and press <Select>. 4.
To assign the address from the BOOTP server, press <Select> when "BOOTP" displays on the bottom
line. 5.
Restoring the Network Configuration
You can return the network configuration to its default settings.
Press <Menu> until you see "Network Setup" on the bottom line of the display. 1.
Press the scroll button ( or ) until "Clear Setting" displays on the bottom line. 2.
Press <Select>. 3.
The first available menu item, "Yes" displays on the bottom line.
Press <Select> to restore the network configuration. 4.
Power the multi-function printer off and back on or reset the network interface card. 5.
Resetting the Network Interface Card
You can reset the network interface card when a network problems occurs.
Press <Menu> until you see "Network Setup" on the bottom line of the display. 1.
The first available item, "Reset NIC", displays on the bottom line.
Press <Select>. 2.
The first available menu item, "Yes" displays on the bottom line.
Press <Select> to reset the network interface card. 3.