Dell 1600n Multifunction Mono Laser Printer User Manual
Page 26
The scan lamp under the scanner glass automatically turns off when it is not in actual use during a preset
period to reduce power consumption and extend the lamp life. The lamp automatically turns on and the
warm-up cycle begins whenever any key is pressed or the document cover is opened or a document is
detected in the ADF.
You can set the length of time for which the scan lamp waits after a scan job is completed before it switches
to the Power Save mode.
Press <Menu> until "Printer Setup" appears on top line of the display.
1.
Press the scroll button ( or ) until "CCD Power Save" appears on the bottom line. Press <Select>.
2.
Press the scroll button ( or ) until the time setting you want appears on the bottom line.
3.
The available time options are 0.5, 1, 4, 8, and 12 (hours).
Press <Select> to save the selection.
4.
To return to Standby mode, press <Return>.
5.