Dell 1600n Multifunction Mono Laser Printer User Manual
Page 54
Use the manual feeder to print transparencies, labels, envelopes or postcards in addition to making quick
runs of paper types or sizes that are not currently loaded in the paper tray.
Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized materials can be printed with this multi-
function printer. The minimum size is 3.0 by 5.0 in. (76 by 127 mm) and the maximum size is 8.5 by 14 in.
(216 by 356 mm).
Acceptable print materials are plain paper with sizes ranging from 3.9 by 5.8 in. (100 by 148 mm) to Legal,
8.5 by 14 in. (216 by 356 mm), the largest size acceptable, and weighing between 16 lb and 32 lb.
NOTE:
Always load only the print materials specified in the Specifications on
page 200
to avoid paper
jams and print quality problems.
NOTE:
Flatten any curl on postcards, envelopes and labels before loading them into the manual
feeder.
To use the manual feeder:
Set the paper type and size referring to
page 66
~
67
.
1.
Load a sheet of the print material with the print side face up into the center of the tray.
2.
CAUTION:
Open the rear output slot when printing on transparencies or 3 by 5 in. media to
prevent the damage or jam.
For envelopes, load a sheet with the flap side face down and with the stamp area on the top left side.
The end of the envelope with the stamp area enters the tray first.