Dell 1600n Multifunction Mono Laser Printer - Manual (Page 149)

[Hsync
Error]
A problem has occurred in the Laser
Scanning Unit (LSU). Unplug the power cord and plug it back
in. If the problem persists, please call
for service.
[LSU Error]
[Jam 1]
[No
Cartridge]
The toner cartridge is not installed. Install the toner cartridge. See
page 23 .
[Line Error] Your multi-function printer cannot connect
with a remote machine or has lost contact
because of a problem with the phone line. Try again. If the problem persists,
please wait for an hour or try a
different phone line if possible and then
try to connect again.
Or, turn the ECM mode on. See page
142.
Memory Full The memory is full. Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
[No Answer] The remote fax machine has not answered
after several redial attempts. Try again. Verify the number to make
sure a fax can be received.
No. Not
Assigned
The speed dial location you tried to use
has no number assigned to it. Dial the number manually using the
number keypad or assign the number.
See
page 128 .
No. Not
Available
You have tried to delete the number for
the delayed fax job. Verify the number to be deleted and try
again.
OR
Delete the number after the delayed
fax job is sent.
[No Paper]
Add Paper
The paper in the paper tray has run out. Load paper in the paper tray. See
page 25 .
No Job Found You are performing an Add/Cancel
operation, but there are no jobs waiting. Check the display to see if there are
any scheduled jobs. The display should
indicate if any scheduled jobs are in
Standby mode, for example, Delay Fax.
[Paper Jam
0]
Open/Close
Door
Paper has jammed in the feeding area of
the paper tray. Clear the jam. See page 164 .
[Paper Jam
1]
Open/Close
Door
Paper has jammed in the paper exit area. Clear the jam. See page 166 .