Dell 2150cn/cdn Color Laser Printer - Manual (Page 169)

Dell Printer Configuration Web Tool 167
USB Settings
Purpose:
To change USB settings on your printer.
Values:
PCL Settings
Purpose:
mm / inch Sets the measurement unit to be used on the
operator panel screen as either mm or inches.
Default Paper Size Sets the default print paper size.
Auto Log Print Specifies if a job history needs to be printed after
every 20 jobs.
Print ID Sets where to print the user ID on the output paper.
Print Text Sets whether the printer outputs PDL data (which is
not supported by the printer) as text when the
printer receives it.
Banner Sheet Insert Position *1 Sets where to insert a banner sheet in the output.
Banner Sheet Specify Tray *1 Sets from which tray a banner sheet is fed.
RAM Disk *2 Sets whether to allocate RAM for the file system for
the Secure Print and Store Print features.
Substitute Tray Sets whether to use another size paper when the
paper that is loaded in the specified tray does not
match the paper size settings for the current job.
Letterhead Duplex Mode *3 Sets whether to print on both sides of letterhead.
Low Toner Alert Msg Alerts you if the toner is low.
Panel Language Used to set the language on the operator panel.
*1 This item is available only when the optional 250-sheet feeder is installed to Dell
2150cdn Color Printer.
*2 This item is available only when the optional 512 MB memory module is installed.
*3 This item is available only for Dell 2150cdn Color Printer.
USB Port Enables USB interface on your printer.