Dell 2150cn/cdn Color Laser Printer - Manual (Page 175)

Dell Printer Configuration Web Tool 173
Clean Developer
Purpose:
To clean each toner cartridge or PHD unit, or to stir the toner in a new toner
cartridge.
Values:
Reset Defaults
Purpose:
To initialize wired network data stored in non-volatile memory
(NVM) . After
executing this function and rebooting the printer, all wired network settings are
reset to their default values.
Color Regi
Chart Click the Start button to print a color registration chart. The color
registration chart prints a lattice pattern of yellow, magenta, and cyan
lines. On the chart, look at the values on the right side that are next to
the line that is perfectly straight for each of the three colors. If the
value for the this line is 0, color registration adjustment is not
required. If the value for this line is any value other than 0, specify the
adjustment values under Color Registration Adjustments.
Color
Registration
Adjustments Sets lateral (perpendicular to paper feed direction) and process (paper
feed direction) color adjustment values individually for Yellow,
Magenta, and Cyan within the range of -9 to 9.
Clean Developer Stirs the toner in a new toner cartridge.
Yellow Toner Refresh Cleans the toner in the yellow toner cartridge.
Magenta Toner Refresh Cleans the toner in the magenta toner cartridge.
Cyan Toner Refresh Cleans the toner in the cyan toner cartridge.
Black Toner Refresh Cleans the toner in the black toner cartridge.
Drum Refresh Cleans the surface of the PHD unit.
Reset Defaults and restart printer. Click the Start button to reset the system
parameters.