Dell 2150cn/cdn Color Laser Printer - Manual (Page 306)

304 Understanding the Printer Menus
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on
the operator panel.
Values:
NOTE: The default for mm/inch varies depending on other settings, such as
Country and Document Size .
Def. Paper Size
Purpose:
To specify the default paper size.
Values:
Job Completed Off Does not emit a tone when a job is complete.
On * Emits a tone when a job is complete.
Fault Tone Off Does not emit a tone when a job ends abnormally.
On * Emits a tone when a job ends abnormally.
Alert Tone Off Does not emit a tone when a problem occurs.
On * Emits a tone when a problem occurs.
Out of Paper Off Does not emit a tone when the printer runs out of paper.
On
*
Emits a tone when the printer runs out of paper.
Low Toner Alert Off Does not emit a tone when a toner is low.
On * Emits a tone when a toner is low.
AutoClear Alert Off * Does not emit a tone 5 seconds before the printer performs
auto clear.
On Emits a tone 5 seconds before the printer performs auto
clear.
All Tones Off Disables all the alert tones.
On * Sets the volume of all the alert tones at once.
Millimeters (mm) * Selects millimeter as the default measurement unit.
Inches (") Selects inch as the default measurement unit.