Dell 2150cn/cdn Color Laser Printer - Manual (Page 402)

400 Maintaining Your Printer
7 Press button to move the cursor to the next value.
8 Press the (Set) button.
The cursor is displayed at the value under RY.
9 Repeat steps 6 to 8 to enter the desired values, and then press the (Set)
button.
NOTE: You can specify each value for process, left, and right colors (LY,
LM, LC, RY, RM, RC, PY, PM, and PC) by repeating the steps 6 to 8.
10 Press and until ColorReg Chart appears, and then press the
(Set) button.
The Are you sure? message appears on the operator panel.
11 Press the (Set) button.
NOTE: To cancel printing the color registration chart, press the
(Cancel) button.
The color registration chart with the new values is printed.
If the straightest line is not at the value of 0, adjust the values again.
Checking the charts before and after the adjustments will help you to
determine the values to enter.
When Using the Tool Box
NOTE:
Using the Tool Box, enter the values that you found in the color registration
chart to make adjustments.
1 Click Start  All Programs  Dell Printers  Dell 2150 Color Printer 
Tool Box.
NOTE: The Select Printer dialog box opens in this step when multiple
printer drivers are installed on your computer. In this case, click the name of
this printer listed in Printer Names, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Color Registration Adjustment from the list at the left side of the
page.
The Color Registration Adjustment page is displayed.