Dell 2150cn/cdn Color Laser Printer User Manual
Page 72
70
Installing Optional Accessories
NOTE:
If your computer provides a wireless adapter tool, change the
wireless settings using this tool. Or you can change the wireless settings using
the tool provided with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a
Select Network Connections from Control Panel.
b
Right-click Wireless Network Connection and select Properties.
c
Select Wireless Network tab.
d
Ensure the check box for Use Windows to configure my wireless
network settings is checked.
e
Click Advanced.
f
Do either of the following:
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the
Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the
Advanced dialog box.
g
Click Add to display Wireless network properties.
h
Enter the setting that you will send to the printer and click OK.
i
Click Move up to move the setting to the top of the list.
j
Click OK to close the Property dialog box.
For Windows Vista:
a
Open Control Panel.
b
Select Network and Internet.
c
Select Network and Sharing Center.
d
Select Connect to a network.
e
Select the setting you send to the printer from the network items listed in
Connect to a network.
f
Select Connect Anyway in the warning dialog box indicating you are
entering an unsecured area.