Dell 2150cn/cdn Color Laser Printer - Manual (Page 195)

Dell Printer Configuration Web Tool 193
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Values:
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting will remain valid if no input is made.
SNMP
Configuration Enable SNMP
v1/v2c
Protocol Select the check box to enable the SNMP v1/v2c
protocol.
Edit SNMP
v1/v2c
Properties Click to display SNMP v1/v2c page and to edit the
setting of SNMP v1/v2c protocol from the page.
Enable SNMP
v3 Protocol Select the check box to enable the SNMP v3
protocol.
Edit SNMP v3
Properties Click to display SNMP v3 page and to edit the
setting of SNMP v3 protocol from the page.
You can click this item only when SSL
communication is enabled.
Community
Name Community
Name (Read
only)
*1
Sets the community name to access (read only) data
using up to 31 alphanumeric characters.
The original setting will remain valid if no input is
made. Characters entered for community name in
the previous settings will not be displayed on the
screen. The default Read Community is public.